Barcode Tagger Updates

Creating an update for your Barcode Tagger is easy. Simply click on the update you wish to download.

FTP Updates

Update by FTP, File Transfer Protocol, diskettes or flash drives are not required.
To set up your FTP Update Services go to the bottom of this page or click here.

EXE File Updates

Do NOT save the exe file directly to your diskette. The exe file is a utility program that must be opened or run. Click either open or run.

BT-730 Barcode Tagger Update

BT-720 Barcode Tagger Update

BT-710 Barcode Tagger Update

BT-700 Barcode Tagger Update

BT-610 Barcode Tagger Update

Updated: 2-6-2012
City State File: 2/12
Postal Bulletin: 22329

Zipped File Updates

Zipped files need to be saved, opened (unzipped) and loaded onto the Barcode Tagger.

BT-810 Barcode Tagger Update (zip file)

BT-800 Barcode Tagger Update (zip file)

BT-730 Barcode Tagger Update (zip file)

BT-720 Barcode Tagger Update (zip file)

BT-710 Barcode Tagger Update (zip file)

BT-700 Barcode Tagger Update (zip file)

BT-610 Barcode Tagger Update (zip file)

Updated: 2-6-2012
City State File: 2/12
Postal Bulletin: 22329

FTP Updates

Signup for email notifications of the FTP Update Service. You will then be notified via email the moment the latest updates are ready for you to download.

Installing an update for your Barcode Tagger is easy. Just choose the FTP option on your tagger update menu screen. Diskettes are not necessary with the FTP Update Service. Diskettes will, of course, continue to be available.

NOTE: This feature is NOT available on the BT 610 machine.

Before you can do an FTP update, you will need to enable and create the network connectivity on your Tagger. The following is a one time procedure done prior to the first time you do an FTP update. These settings will remain in place for all subsequent FTP updates or until you re-set them. You may print out a detailed FTP Information Form here and keep it as a record of your settings.

For the BT 700 machine:

  1. From the On Demand Utilties screen choose the System Functions menu.
  2. Choose Network Settings
    • Enable the Network Connection
    • Enter the tagger Static IP address (ask your IT department about this setting)
    • Enter the Gateway IP address (ask your IT department about this setting)
    • Apply the settings and reboot.
  3. Once you have your Tagger networked, you will simply follow the menu instructions to download your update.
    • Select the ‘Update System’ option.
    • Select the ‘Update by FTP’ option. Your tagger will then automatically connect to our FTP server and list the update file(s).
    • Select this file, i.e. ’1) 0703-001.710′ This file will automatically download and install to your tagger.

For the BT 710/720/730/800 series machines:

  1. Go to the System Settings menu
  2. Go to the Network Settings menu
  3. Choose TCP/IP Settings (NOT FTP Settings)
    • Enter the tagger Static IP address, if necessary (ask your IT department about this setting)
    • Enter the Gateway IP address, if necessary (ask your IT department about this setting)
    • Enter the Subnet Mask, if necessary (ask your IT department about this setting)
    • Apply Settings
  4. Once you have your Tagger networked, you will simply follow the menu instructions to download your update.
    • Select the ‘Update System’ option.
    • Select ‘Update by FTP’ or ‘Whittier FTP site’. Your tagger will then automatically connect to our FTP server and list the update file(s).
    • Select the Update to download (Usually the latest one)
    • Select ‘Continue’. The tagger will then download and install your update automatically.

Last Updated: 2/3/2012

City State File: 2/12

Postal Bulletin:22329